Nuclear Engineering Division

Corrosion and Mechanics of Materials

Selection of Publications

 

Journal Articles

Conference Papers

  • Ligament Rupture and Unstable Burst Behaviors of Axial Flaws in Steam Generator U-Bends
    C. B. Bahn, S. Majumdar
    22nd International Conference on Structural Mechanics in Reactor Technology (SMiRT-22), San Francisco, CA, August 18-23, 2013
  • Modeling of Steam Generator Tube Rupture using Extended Finite Element Method
    S. Mohanty, S. Majumdar, K. Natesan
    22nd International Conference on Structural Mechanics in Reactor Technology (SMiRT-22), San Francisco, CA, August 18-23, 2013
  • Crack Growth Behavior of Irradiated 304L SS in PWR Environment
    Y. Chen, B. Alexandreanu, K. Natesan, A.S. Rao
    The 16th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Asheville, NC, August 11-15, 2013
  • Cracking of Irradiated Cast Stainless Steels in Low Corrosion Potential Environments
    Y. Chen, B. Alexandreanu, K. Natesan, A.S. Rao
    The 16th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Asheville, NC, August 11-15, 2013
  • In situ characterization of Grade 92 steel during tensile deformation using high energy x-ray diffraction and small angle x-ray scattering
    L. Wang, M. Li, J.D. Almer
    TMS 2013 Annual Meeting, San Antonio, TX, March 3-7, 2013
  • Materials performance in sodium-cooled fast reactors: past, present, and future
    K. Natesan, M. Li
    International Conference on Fast Reactors & Related Fuel Cycles: Safe Technologies and Sustainable Scenarios, Paris, France, March 4-7, 2013
  • SCC behavior of Alloy 152 weld in a PWR environment
    B. Alexandreanu, Y. Chen, K. Natesan, W.J. Shack
    15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Colorado Springs, CO, August 7-11, 2011
  • Creep-fatigue behavior in ferritic-martensitic steels
    M. Li, W.K. Soppet, S. Majumdar, K. Natesan
    American Society of Mechanical Engineers (ASME) Pressure Vessels and Piping Conference, Baltimore, MD, July 17-21, 2011
  • Identification of fatigue crack growth in alloy 600 tube specimens during constant pressure leak tests
    C.B. Bahn, S. Majumdar
    Applied Mechanics and Materials Conference, Chicago, IL, May 30 - June 1, 2011
  • Structural integrity analysis of high temperature gas cooled reactor graphite core components
    S. Mohanty, S. Majumdar, M. Srinivasan
    Applied Mechanics and Materials Conference, Chicago, IL, May 30 - June 1, 2011
  • Modeling creep-fatigue behavior in G91 steel by damage rate equation
    M. Li, S. Majumdar, K. Natesan
    Symposium on Creep-Fatigue Interactions: Test Methods and Models, San Antonio, TX, November 17-19, 2010
  • Materials performance in advanced steam cycle and in oxy-fuel combustion systems
    K. Natesan, Z. Zeng
    12th International Conference on Modern Materials and Technologies (CIMTEC 2010), Montecatini Terme, Tuscany, Italy, June 13-18, 2010
  • Study of irradiated Mod.9Cr-1Mo steel by synchrotron XAS
    M. Li, Y. Trenikhina, D. Olive, H. Ganegoda, J. Terry, S.A. Maloy
    Published in: Trans. Am. Nucl. Soc., 2010 American Nuclear Society (ANS) Annual Meeting, San Diego, CA, June 13-17, 2010

Technical Reports

  • June 2013 Update: Status Report on Assessment of Environmentally Assisted Fatigue for LWR Extended Service Conditions. Summary of 1. Room-Temperature Fatigue Test of 316 SS Specimens and Subsequent Data Analysis for Cyclic Plasticity Constitutive Model Development. 2. Other Ongoing Experimental and Mechanistic Modeling Activities
    S.  Mohanty, W.K. Soppet, S. Majumdar, K. Natesan
    ANL/LWRS-13/2, June 2013
  • Crack Growth Rate and Fracture Toughness Tests on Irradiated Cast Stainless Steels
    Y. Chen, B. Alexandreanu, K. Natesan
    ANL-12/56, November 2012
  • Creep rupture testing of alloy 617 and A508/533 base metals and weldments
    K. Natesan, M. Li, W.K. Soppet, D.L. Rink
    ANL/EXT-22/46, September 2011
  • Final report on thermal aging effects on advanced materials for SFR applications
    M. Li, D.L. Rink, W.K. Soppet, K. Natesan
    ANL-ARC-203, September 2011
  • Final report on improved creep-fatigue models on advanced materials for SFR applications
    M. Li, W.K. Soppet, S. Majumdar, D.L. Rink, K. Natesan
    ANL-ARC-204, September 2011
  • Corrosion performance of advanced structural materials in sodium
    K. Natesan, Y. Momozaki, M. Li, D.L. Rink
    ANL-GenIV-163, September 2010
  • Code qualification of structural materials for AFCI advanced recycling reactors
    K. Natesan, M. Li, S. Majumdar, R.K. Nanstad, T-L. Sham
    ANL-AFCI-244, September 2008

 

Last Modified: Thu, April 21, 2016 4:55 AM

 

RELATED RESOURCES

Postdoc Jobs

For more information:

Corrosion and Mechanics of Materials
Sect. Manager: K. Natesan

K. Natesan's Executive Bio